
The conveyor belt runs on the heating plate at a constant speed. The heat source inside the heating plate can be steam, hot water or electric heating.
As the conveyor belt runs, the temperature can be adjusted up and down according to specific characteristics. The material is discharged from the previous evaporation and drying to the final cooling.
Model | SED-35WG | ||
Working Frequency(MHz) | 2450±15 | ||
Electronic Consumption (kVA) | <50 | ||
Micro Wave Power(kW) | 35(Can be controlled) | ||
Water Evaporation Capacity(kg/h) | 28~42 | ||
Material tray rotating speed(rpm) | <6 | ||
Micro Wave Leakage(mW/cm2) | <3 | ||
Cooling water flow volume(L/min) | >35 | ||
Pipe hole Size | Cooling water inlet hole | 1" | |
Cooling water outlet hole | 1.5" | ||
Vacuum hole | 2.5" | ||
Sewage hole | 1.5" | ||
Dimension (m)(For your reference) | 2.3×2.05×2.5 | ||
External situation | Power supply | 380V/50Hz | |
Circulation water pump | 1.1kW | ||
Environment Temperature | 5~35℃ |
←Previous: Low Temperature Vacuum Drying Machine
Next: Vacuum Dryer Fruit→