The Drying Machine is suitable for Dry mixing of plastic pellets,Masterbatch , pulverized materials and plastic sheet materials.
The vertical mixer uses the rapid rotation of the screw to raise the raw material from the bottom of the barrel from the center to the upper part, then scatters it in an umbrella shape and returns it to the bottom, so that the raw materials can be tumbling up and down in the barrel, and a large amount of raw materials can be evenly distributed in a short time. The mix is complete.
1. The machine occupies a small area, low energy consumption, large capacity, labor saving, convenient control, saving time and effort, and the mixing effect is quick and even. The screw is used for feeding, and the feeding is convenient. The workers directly stand on the ground to feed (the fan can also be used to directly feed the plastic particles into the barrel from the pelletizer). 2, vertical design, easy to operate, easy to maintain. 3. The materials in contact with the raw materials are made of stainless steel, which is easy to clean and avoid rust. 4, stirring and drying synchronization, because the material is in the process of drying, continue to maintain the flow state, heat penetration is uniform, drying time is short and not easy to knot; 5, more models, large capacity, always have a performance loading: 300kg to 8T. 6, heating type machine dry mixing function two in one, when there is no need to dry, just turn off the heating switch and fan switch, you can use it for plastic mixing and homogenization purposes, one machine and two. 7, automatic operation timing, overload protection, feeding limit alarm and other functions; protection devices to ensure safe operation. 8, can be widely used in plastic sheet material, pulverized materials, powder materials, plastic granules, plastic new and old materials and added color masterbatch evenly used, etc.
Main motor (kw)
Blower Power (kw)
Heating power (kw )
Thickness of Iron Sheet thickness
Rotary Speed (r/min)
Spiral mixing blade thickness(mm)