Powdery Vibration Fluidized Bed Dryer
The powder vibrating fluidized bed dryer material enters the bed uniformly through the feeding conveyor belt and the feeder. Under the action of the vibration force, the material continuously moves upward in the horizontal direction, and at the same time, it exchanges heat with the hot air rising from the bottom.
The moisture of the material evaporates and wets quickly. The air is discharged from the exhaust fan, and the material is completely dried and discharged from the discharge port.
1. Set an adjustable weir at the outlet, and control the drying time by adjusting the height of the weir.
2. The perforated board adopts back pressure technology to ensure that the perforated board is flat.
3. After the production is completed, the lower bed is electrically heated, which eliminates the welding gravity and improves the strength of the bed.
4. The center tube equipped with a vibration motor is welded to the reinforcing plate according to the angle of vibration radiation to make the material uniformly fluidized.
5. The upper bed has a fixed design and is softly connected to the lower bed, which reduces the load of the vibration motor and at the same time reduces the strength of the upper bed.
TOTAL ELECTRICITY POWER
ABOUT 21 KW
1.1KW/PC,1 PIECES (FREQUENCY AND ADJUSTABLE)
DRYING TEMPERATURE RANGE
HOT AIR BLOWER
MC-84 THICKNESS 3MM