Bedroom Vibration Fluidized Bed Dryer

Product description

The vibrating fluidized bed dryer is widely used for drying, cooling and humidifying (or at the same time) operation of powder or granular materials. The material enters the machine from the feed port and moves forward continuously with the fluidized bed liquid level under the action of vibration force. 

The hot air passes through the fluidized bed and exchanges heat with the moist material. Then the humid air is discharged through the exhaust fan, some fine powder is collected by the cyclone separator and dust collector, and the dried product is discharged from the discharge outlet.

main features

1. The upper and lower beds adopt a new type of quick opening structure. You can move easily when you go to bed. Therefore, it is very convenient to clean and clean the drying system.

2. The bed board adopts laser drilling, which can effectively avoid the deformation in the ordinary drilling process.

3. The bottom bed is supported by stainless steel seamless pipes, the bed structure is firmer and the equipment life is longer.

4. The material is heated uniformly, the heat exchange is sufficient, and the drying strength is high. Energy saving is about 30%.

5. The vibration source is a vibration motor. It has the characteristics of stable operation, convenient maintenance, low noise and long life.

6. The fluid state is stable, and there is no gap or blowing phenomenon.

7. Less damage to the surface of the material. Can be used to dry fragile materials. Even if the particles of the material are irregular, the work efficiency will not be affected.

8. Adopt a fully sealed structure. Effectively avoid cross-infection with air and clean operating environment.

main parameter