Introduction
SED-25SP Uphill dust collector did not utilize many advanced technologies in the development process. The Uphill dust collector can be used as a lifter or a dust collector. It is usually used in combination with other tablet presses and metal detectors. It is very suitable for the fields of pharmaceutical chemical engineering, electronics and high-quality dust removal. Cause damage. In addition, it can also be used as a conveyor device for tablets of any shape that needs to be dusted. Most importantly, it complies with GMP standards.
The machine has also adopted many new designs to allow and ensure better and safer production.
Parameters
Model | SED-25SP |
Production efficiency (tablet∕hour) | 1000000(φ8) |
Power(W) | 150 |
Dedusting distance (m) | 6.2 |
Maximum tablet diameter | φ25 |
Input | 220V∕110V 50Hz∕60Hz 1P |
Air compression | 0.1∕min―0.1Mpa |
Vacuum | 2.5∕min―0.1Mpa |
Noise (db) | <75 |
Dimension | 500*550*1350―1500 |
Weight (Kg) | 70 |
Installation
1. Check if the weather receives the correct model: SED-25SP uphill dust collector
2. Check the weather, all items on the packing list are in the received package
3. Place the machine on a level ground
4. Carefully remove the protective oil on the surface of the machine
5. Make sure to remove the three hex screws installed on the lower plate, refer to Figure 4 if necessary.
6. Check if the parts are loose
←Previous: Lifting Machine