Hot Sale medicine automatic blister packing machine price
The blister packaging machine has the following features: Realizable devices: adjustable mold chute, heating device version positioning device, automatic paper feeding, pressing, blister forming, automatic feeding, heat sealing, batch number, finished product punching output .
Equipped with an advanced computer control system to realize product statistics, equipment operation statistics, fault maintenance indicators and additional detection of various packaging materials, alarms and emergency automatic shutdown functions to ensure the safe and accurate operation of the equipment. The use of various simulation robots can move quickly and accurately, which can greatly reduce the labor intensity and improve production efficiency.
1. The PVC preheating starts to heat, the upper and lower heating plates are closed, and the PVC plastic plates are preheated between the upper and lower heating plates, preheated during traction, and enters the foam forming mold.
2. After the blister molding mold is fixed, the lower mold is molded on the cam under the upper limit and pressure of the cam, and then the valve is opened. The compressed air is injected into the mold cavity through the molding mold through the filtering pressure of the compressed air, and the PVC plastic is molded.
3. After the Feeder is brushed into the finished product in the bubble cavity through a brush,
4. The heat sealing mechanism bonds the required packaging materials (such as aluminum foil, PE film) and the PVC plastic film through the principle of hot pressing to achieve the purpose of heat preservation and pollution prevention.
5. The batch number is sealed with translucent PVC plastic film marked with date and batch number to show the difference.
6. The traction mechanism uses a servo motor and a ball screw mechanism to achieve a reciprocating motion mechanism. At the same time, an oil cylinder is used to move up and down with the motion to achieve the traction of the PVC sheet. The traction length and traction speed can be realized through the visual operation of the touch screen.
7. The traction arm of the punching mechanism will form a good pallet die. After the finished product is separated from the waste, the finished product will be automatically output.
8. The waste collection mechanism rolls the waste into a roll through a reel driven by a winding motor to facilitate customers to collect waste.
15-35 times / min
Use of packaging materials and specifications
Use of packaging materials and specifications Paper card: width 250mm thickness 0.02-0.04mm; medicinal PVC maximum width 350mm thick 0.25-0.35mm
Adjustable travel range
30mm - 140mm
depending on area
The scope of packaging for
pharmaceutical food medical equipment and other categories.
three-phase 380V, 50/60Hz
Maximum forming depth (mm)
Maximum forming area (mm2)
240 × 140 × 24mm
Power supply specifications
three-phase four-wire 380V 50Hz
Total power consumption (kW)
Compressed air pressure (MPa)
Compressed air consumption (m3 / h)
≥0.8m3 / min
Cooling water consumption (m3 / h)
Ordinary tap water circulation cooling
Dimensions (L × W × Hmm)
4500 × 800 × 1650mm
Motor frequency modulation capacity