SED-40PTG Effervescent Tablets Tube Filler Machine for bobbin bottles is applicable to the packing of bigger and thinner tablets which are orderly fed into bobbin bottles/tube in a single row in an overlapping way. The device utterly adopts a PLC for centralized control. It is verified in fiber and photoelectric detection and other kinds of detection to have steady performance and reliably automatic operation. It can automatically give alarms and shut down in case of no tablets, bottles or covers. Its part in contact with the tablets is made of superior 316 stainless steel.which can fully requirement of GMP.
Composition and Function:
1、Cap Vibrating System: Loading cap to hopper by manual, automatically arranging cap to rack for plugging by vibrating system.
2、Tablet feeding system: Put Tablet into hopper by manual, vibrating and sending tablet to channels automatically for packing preparation.
3、Tube feeding unit: put tube into hopper by manual, shaking system will send tube to rack automatically. Tube direction should be checked by manual before put into hopper
4、Cap Pushing unit: When tube get tablet, cap pushing system will push cap and close tube automatically, no tablet no capping, no tube no capping.
5、Electronic Control Section: This machine is controlled by PLC, cylinder and stepper motor. with automatic multi-function alarm system.
Main materials: 1、The machine plate and frame are adopts of steel and enamel paint, the platform cover is 304, the other uses aluminum alloy sandblasting, 304 stainless steel, and all the material touch with tablet will adopt sus316l .
purified compressed air whose pressure and consumption are 0.5~0.6MPa and 0.28m3/minute respectively
Adapt to the range of specifications
Tablet diameter: Ф25mm. Table thickness: 4.5mm, Loading quantity:14 pieces.
←Previous: No Information