Large TCM mill is mainly suitable for large pharmaceutical factories, hospitals and pharmacies, while small TCM mill with low output is more suitable for household, small pharmacy and laboratory.
The industry expresses, especially small traditional Chinese medicine pulverizer, not only is in the unit such as the factory, scientific research unit, clinic hospital is used, more important is it is a kind of pulverizer that can be used for common family, depend on compact volume, cheap price and simple use method and get the favor of common people.
Although the traditional Chinese medicine crusher has many advantages and can be well applied by pharmaceutical factories, pharmacies and families, the life and normal operation of the equipment will be affected if no attention is paid to the maintenance of the equipment.
It is summer, the hot and dry weather is very destructive to the equipment, so users also need to pay attention to the maintenance of traditional Chinese medicine grinder.If not properly maintained, equipment is likely to go on strike, requiring more time and effort.So, how should Chinese traditional medicine pulverizer maintain?
First, when the new machine runs, the transmission belt is easy to stretch, should pay attention to adjust the belt proper tightness, to ensure the working life of the belt.
Second, the equipment should be placed in a relatively stable place, the surrounding environment should be kept clean, dry, and ventilated.
Third, before starting the machine, the user must first check whether there is any sundries in the main machine chamber of the TCM crusher, and the material must be checked before destruction, and the material is not allowed to mix with any impurities.
Fourth, check regularly whether the solid nut of the moving gear plate is loose, all the fastening parts shall not be loose, especially the screws in the gear plate should be firm.
Fifth, where there is a cup of oil, before starting to inject appropriate lubricating oil, if the workload is too large, should increase the number of refueling according to the situation.
Six, the replacement of vulnerable parts and rotating bearings to use the process screw hole, and by the special personnel to operate.
In addition, a lot of users reaction, in the use of traditional Chinese medicine crusher process, often appear some problems.In this regard, the industry to share a few common fault causes and troubleshooting methods.
The motor does not turn when energized.The causes include poor contact of power supply or loose plug, poor contact of power switch, poor contact of microswitch and failure of thermal protector.
When troubleshooting, the power supply must be cut off to perform the following operations, in turn: repair the power supply or replace the joint, repair or replace the switch, adjust the micro switch, replace the thermal protector.
Motor housing surface overheating.The causes include excessive load, motor moisture, low power supply voltage.The elimination method is still to reduce the working pressure, dry the motor, adjust the power supply voltage.
The surface of the commutator produces a ring fire or a large spark.The reason for this may be that the surface of the commutator is not smooth, so it is possible to remove the debris on the surface of the commutator when the power is cut off.
After energizing, the motor turns too slowly or does not turn and produces vibration.The causes include: the mechanical part is stuck (there is a foreign body in the crusher trough), the centrifugal is not opened, and the power supply voltage is too low.The removal methods are: remove the foreign matter in the crushing tank and adjust the power supply voltage.