Semi Auto Plastic Filling And Sealing Machine

Product description

1. The plastic filling and sealing machine adopts mechanical structure, which is stable, fast, high efficiency, low noise, simple structure, convenient operation and maintenance, and low failure rate.

2. The parts contacting materials are made of high-quality stainless steel (usually SUS304, SUS316L).

3. The special valve structure realizes the dual application of this machine for paste liquid and liquid filling.

4. The seal is firm, the speed is fast, and the position is automatic and accurate. Adopt PLC control system and various sealing machines to make the sealing shapes different. Equipped with dustproof plexiglass.

5. The filling machine must be installed and debugged before use. Please read the instructions before commissioning. After installing the filling machine, insert the container to be filled into the tool box and turn on the power.

6. The power socket must be a three-core socket with a grounding wire to prevent electric shock to the cabinet, and then turn off the power. The power of machines. Use the support plate of the filling frame to push the filling frame, and use your fingers to move the positioning sleeve upwards, so that the filling needle is exposed or retracted without blocking.

7. After using the filling machine, please pay attention to its maintenance. In the maintenance process, please remove and clean the screws at the same time, so as not to affect the process requirements of the other screw when the first screw is removed.

8. Ensure that the surface of the filling machine is clean and hygienic, and deal with breakpoints when it is not working. In addition, while the filling machine is properly maintained and used, it must be tested and debugged regularly. Only in this way can the filling machine work healthily and stably.