Solid Preparation Equipment attention when cutting

Date:Jun 01, 2019

When filling Solid Solid Preparation Equipment, pay attention to blocking the lower feed port. The dried material contains a lot of water, which is easy to bond together. If it is bonded together during the blanking, it will cause the material to block the warehouse. This will cause the material to be dried to fall down and cannot enter the Solid Solid Preparation Equipment and cannot be dried. In addition, in addition to the usual cutting, pay attention to the operation, the engineer needs to adjust the Solid Solid Preparation Equipment accordingly, and the mixing device is installed at the lower feeding port, which can effectively prevent the materials from sticking together to block the warehousing.

The material quantity should be paid attention to when the material is to be discharged. The quantity requirement is mainly determined according to the production of Solid Solid Preparation Equipment. If the output is insufficient, too much feeding is not conducive to the work of Solid Solid Preparation Equipment.Humidity control during feeding, the humidity of different materials to be dried is different, some are high and some are low. When drying the material to be dried, it is necessary to check the humidity of the material to be dried, and select the corresponding delivery standard according to the materials with different humidity.

In order to ensure normal operation, it is necessary to check whether the parts and fastening parts of Solid Solid Preparation Equipment are loose, whether there is abnormal sound, and find out the faults in time, and check some transmission mechanisms such as V-belts and chains, whether they are deformed loose and worn, timely Adjust the tightness of the chain and check whether the electrical start is safe and the device is sensitive, accurate and reliable.

Previous: How Solid Preparation Equipment operates dry

Next: No Information