[[TitleIndustry]]

How Solid Preparation Equipment operates dry

Date:Jun 03, 2019

Solid Preparation Equipment operates dry, solvent recovery, heating, sterilization, reaction, cooling, drying under reduced pressure, and the like. Processed products in the form of fine powders, granules, pellets, such as flaky materials, we apply a wide particle size in the shape. In addition, Solid Preparation Equipment is a possible high moisture content material, a muddy substance, and a processing viscous substance.

The Solid Preparation Equipment unit is compact due to the large heat transfer area per unit volume. The contact with the wedge-shaped blade of the heat transfer surface is promoted by the effect of biting into the powder, and a large heat transfer coefficient due to the chaotic powder can be obtained. In addition, a high fill rate of 85% to 90% can be used to make the heat conduction area. The mutual movement of the wedge-shaped flaps overlapping the two shafts by Solid Preparation Equipment prevents adhesion and then pressing. Therefore, the effective heat transfer effect will continue to exist. Narrow residence time distribution without uneven drying.

In a possible operation with less carrier gas, facilities such as dust collectors, Solid Preparation Equipment requires a small. In particular, a major advantage in solvent recovery is the use of inert gas closed circuits. High moisture content, muddy substances, can also be treated in viscous materials. Because Solid Preparation Equipment can also be used for boiling point reduction operation under reduced pressure, it can also be continuous drying, such as weak heat. It is also treated at high temperatures (290 ° C) by using a heat transfer medium for oil. The Solid Preparation Equipment unit is designed to be dried at the same time and can be cooled in a single unit.


Previous: Preliminary Packaging Equipmen's specific design process

Next: Solid Preparation Equipment attention when cutting