The capping machine, also known as capping machine, capping machine or capping machine, is used to tighten and loosen the caps of plastic bottles and glass bottles (molded bottles or plastic vials). The capping machine is generally used for the aluminum cap or aluminum-plastic cap crimping and sealing equipment after the antibiotic powder injection glass bottle (molded bottle or tube bottle) is filled. On the market, there are mainly press-spin capping machines, clamp-spin capping machines, and linear screw capping machines. The capping machines generally have speed and torque adjustment devices. The more common products in daily life include beer caps, beverage plastic caps, etc., which are all capped and sealed products using a capping machine.
The main classification of capping machine: automatic capping machine, vacuum capping machine, capping capping machine, handheld capping machine, desktop capping machine.
Operation points of the capping machine:
The capping machine is widely used in beverage and pure water industries. The capping machine itself has the advantages of reasonable structure, excellent performance, fast speed, simple operation and convenient maintenance. The quality is stable, and the important parts are made of acid-resistant aluminum and stainless steel, which are suitable for the production of different bottle types of various calibers.
The capping machine evacuates the packaging bottle and then tightens it, which prolongs the storage time of the package, reduces the failure rate of the capping machine, and improves the packaging efficiency of the capping machine. What are the precautions for the correct operation of the capping machine? Here is an introduction.
1. Rolling wheel adjustment: Put the bottle on the bracket and raise the bracket to the highest point. First loosen the lock nut to adjust the rolling wheel so that the (spring) edge of the two rolling wheels is on the bottle's edge. On the starting point, loosen the lock nut and adjust the adjusting screw so that the edges of the two rolling wheels are in contact with the cover. A little pressure is appropriate, and then tighten the nut.
2. Adjust the lock wheel: adjust the two lock wheels, first loosen the lock nut, adjust the lock wheel so that the edges of the two lock wheels are in contact with the lower edge of the bottle cap, a little pressure is appropriate, and then lock the nut ( Note: The adjustment should be from loose to tight, adjust while pulling the lock).
3. Bottle cap lock: loosen the top screw, remove the capping head, then remove the entire lock, install the appropriate plastic lock on the cone sleeve, and then adjust the lifting height of the bracket to meet the working requirements.
4. Height adjustment: start the machine to lower the bracket to the lowest point, then place the bottle on the bracket, loosen the brake nut, turn the adjusting screw to make the bracket rise, and then adjust the appropriate distance between the bottle cap and the capping head ( Generally adjusted in place when leaving the factory).
After purchasing the capping machine, we will provide strict training to the operators, and strictly follow the instructions during the operation process to reduce the occurrence of failures of the capping machine and greatly extend the service life of our equipment.